Most orders placed by 4:00 PM EST Ship Same Day!

Sailing

Sailing

Sort by:
{"id":513309540385,"title":"ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel","handle":"andersen-28-st-fs-2-speed-self-tailing-manual-winch-full-stainless-steel","description":"\u003cb\u003e28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Rib™\u003c\/b\u003e\u003cbr\u003eANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Ratio\u003c\/b\u003e\u003cbr\u003ePower Ratio is the mechanical advantage of the winch and is calculated as follows:\u003cbr\u003e\u003cbr\u003e\u003cu\u003elength of handle x gear ratio\u003c\/u\u003e\u003cbr\u003e        radius of drum\u003cbr\u003e\u003cbr\u003eThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).\u003cbr\u003e\u003cbr\u003eThis means that by applying a load of 10kg, using a 10\" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAesthetically appealing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA prerequisite for those yachtsman wanting their yacht to look its best\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Stainless Steel - synthetic cap and bases are replaced with stainless steel parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDrum Ø:\u003c\/b\u003e70mm(2-3\/4\")\u003cbr\u003e\u003cb\u003eBase Ø:\u003c\/b\u003e125mm(4-15\/16\")\u003cbr\u003e\u003cb\u003eHeight:\u003c\/b\u003e151mm(5-15\/16\")\u003cbr\u003e\u003cb\u003eLine Entry:\u003c\/b\u003e65mm(2-9\/16\")\u003cbr\u003e\u003cb\u003eLine Size:\u003c\/b\u003e8-14mm(1\/8 - 11\/16\")\u003cbr\u003e\u003cb\u003eWeight;\u003c\/b\u003e3.9kg(8.6lbs)\u003cbr\u003e\u003cb\u003eGear ratio 1st speed\u003c\/b\u003e1.3 : 1\u003cbr\u003e\u003cb\u003eGear ratio 2nd speed:\u003c\/b\u003e4.0 : 1\u003cbr\u003e\u003cb\u003ePower ratio 1st speed:\u003c\/b\u003e9.5 : 1\u003cbr\u003e\u003cb\u003ePower ratio 2nd speed:\u003c\/b\u003e28.6 : 1\u003cbr\u003e\u003cbr\u003e\u003cb\u003eService Kits\u003c\/b\u003e\u003cbr\u003eRegular maintenance is important for smooth and trouble-free operation of your winches. ANDERSEN Winch Service Kits use authentic factory replacement parts and include all the crucial spare parts necessary to ensure perfect performance from your winch every time. \u003cbr\u003e\u003cbr\u003eIn normal recreational use, we recommend cleaning, greasing and inspection of all moving parts every 2 years for extending winch life. Under extensive use, such as racing, charter or blue water sailing, we recommend more regular maintenance procedures; at least once every year. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN 28 ST FS 2-SPEED WINCH FULL STAINLESS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA2028010000\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800467754","published_at":"2019-04-10T18:10:30-04:00","created_at":"2018-02-16T13:54:56-05:00","vendor":"Andersen","type":"Sailing","tags":["andersen","sailing","Winches"],"price":68288,"price_min":68288,"price_max":68288,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875801092129,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55003","requires_shipping":true,"taxable":true,"featured_image":{"id":1976535285793,"product_id":513309540385,"position":1,"created_at":"2018-02-16T13:54:56-05:00","updated_at":"2018-05-10T13:02:23-04:00","alt":"ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55003.jpg?v=1525971743","variant_ids":[6875801092129]},"available":true,"name":"ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel","public_title":null,"options":["Default Title"],"price":68288,"weight":4037,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"9316800467754"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55003.jpg?v=1525971743"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55003.jpg?v=1525971743","options":["Title"],"content":"\u003cb\u003e28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Rib™\u003c\/b\u003e\u003cbr\u003eANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Ratio\u003c\/b\u003e\u003cbr\u003ePower Ratio is the mechanical advantage of the winch and is calculated as follows:\u003cbr\u003e\u003cbr\u003e\u003cu\u003elength of handle x gear ratio\u003c\/u\u003e\u003cbr\u003e        radius of drum\u003cbr\u003e\u003cbr\u003eThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).\u003cbr\u003e\u003cbr\u003eThis means that by applying a load of 10kg, using a 10\" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAesthetically appealing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA prerequisite for those yachtsman wanting their yacht to look its best\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Stainless Steel - synthetic cap and bases are replaced with stainless steel parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDrum Ø:\u003c\/b\u003e70mm(2-3\/4\")\u003cbr\u003e\u003cb\u003eBase Ø:\u003c\/b\u003e125mm(4-15\/16\")\u003cbr\u003e\u003cb\u003eHeight:\u003c\/b\u003e151mm(5-15\/16\")\u003cbr\u003e\u003cb\u003eLine Entry:\u003c\/b\u003e65mm(2-9\/16\")\u003cbr\u003e\u003cb\u003eLine Size:\u003c\/b\u003e8-14mm(1\/8 - 11\/16\")\u003cbr\u003e\u003cb\u003eWeight;\u003c\/b\u003e3.9kg(8.6lbs)\u003cbr\u003e\u003cb\u003eGear ratio 1st speed\u003c\/b\u003e1.3 : 1\u003cbr\u003e\u003cb\u003eGear ratio 2nd speed:\u003c\/b\u003e4.0 : 1\u003cbr\u003e\u003cb\u003ePower ratio 1st speed:\u003c\/b\u003e9.5 : 1\u003cbr\u003e\u003cb\u003ePower ratio 2nd speed:\u003c\/b\u003e28.6 : 1\u003cbr\u003e\u003cbr\u003e\u003cb\u003eService Kits\u003c\/b\u003e\u003cbr\u003eRegular maintenance is important for smooth and trouble-free operation of your winches. ANDERSEN Winch Service Kits use authentic factory replacement parts and include all the crucial spare parts necessary to ensure perfect performance from your winch every time. \u003cbr\u003e\u003cbr\u003eIn normal recreational use, we recommend cleaning, greasing and inspection of all moving parts every 2 years for extending winch life. Under extensive use, such as racing, charter or blue water sailing, we recommend more regular maintenance procedures; at least once every year. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN 28 ST FS 2-SPEED WINCH FULL STAINLESS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA2028010000\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800467754"}
ANDERSEN 28 ST FS  - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel - Lightship Marine Outfitters

ANDERSEN 28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel

$682.88

28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelPower Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing t...


More Info
{"id":513309573153,"title":"ANDERSEN 40 ST FS - 2-Speed Self-Tailing Maunal Winch - Full Stainless Steel","handle":"andersen-40-st-fs-2-speed-self-tailing-maunal-winch-full-stainless-steel","description":"\u003cb\u003e40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Rib™\u003c\/b\u003e\u003cbr\u003eANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Ratio\u003c\/b\u003e\u003cbr\u003ePower Ratio is the mechanical advantage of the winch and is calculated as follows:\u003cbr\u003e\u003cbr\u003e\u003cu\u003elength of handle x gear ratio\u003c\/u\u003e\u003cbr\u003e        radius of drum\u003cbr\u003e\u003cbr\u003eThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).\u003cbr\u003e\u003cbr\u003eThis means that by applying a load of 10kg, using a 10\" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAesthetically appealing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA prerequisite for those yachtsman wanting their yacht to look its best\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Stainless Steel - synthetic cap and bases are replaced with stainless steel parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDrum Ø:\u003c\/b\u003e75mm(2-15\/16\")\u003cbr\u003e\u003cb\u003eBase Ø:\u003c\/b\u003e152mm(6\")\u003cbr\u003e\u003cb\u003eHeight:\u003c\/b\u003e174mm(6-7\/8\")\u003cbr\u003e\u003cb\u003eLine Entry:\u003c\/b\u003e71mm(2-13\/16\")\u003cbr\u003e\u003cb\u003eLine Size:\u003c\/b\u003e8-14mm(1\/8 - 11\/16\")\u003cbr\u003e\u003cb\u003eWeight;\u003c\/b\u003e4.9kg(10.8lbs)\u003cbr\u003e\u003cb\u003eGear ratio 1st speed\u003c\/b\u003e1.3 : 1\u003cbr\u003e\u003cb\u003eGear ratio 2nd speed:\u003c\/b\u003e6.0 : 1\u003cbr\u003e\u003cb\u003ePower ratio 1st speed:\u003c\/b\u003e8.9 : 1\u003cbr\u003e\u003cb\u003ePower ratio 2nd speed:\u003c\/b\u003e40.0 : 1\u003cbr\u003e\u003cbr\u003e\u003cb\u003eService Kits\u003c\/b\u003e\u003cbr\u003eRegular maintenance is important for smooth and trouble-free operation of your winches. ANDERSEN Winch Service Kits use authentic factory replacement parts and include all the crucial spare parts necessary to ensure perfect performance from your winch every time. \u003cbr\u003e\u003cbr\u003eIn normal recreational use, we recommend cleaning, greasing and inspection of all moving parts every 2 years for extending winch life. Under extensive use, such as racing, charter or blue water sailing, we recommend more regular maintenance procedures; at least once every year. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN 40 ST FS 2-SPEED WINCH FULL STAINLESS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA2040010000\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800467761","published_at":"2019-04-22T18:00:28-04:00","created_at":"2018-02-16T13:54:58-05:00","vendor":"Andersen","type":"Sailing","tags":["andersen","sailing","Winches"],"price":84588,"price_min":84588,"price_max":84588,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875801124897,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55005","requires_shipping":true,"taxable":true,"featured_image":{"id":1976535318561,"product_id":513309573153,"position":1,"created_at":"2018-02-16T13:54:58-05:00","updated_at":"2018-05-10T13:02:24-04:00","alt":"ANDERSEN 40 ST FS - 2-Speed Self-Tailing Maunal Winch - Full Stainless Steel - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55005.jpg?v=1525971744","variant_ids":[6875801124897]},"available":true,"name":"ANDERSEN 40 ST FS - 2-Speed Self-Tailing Maunal Winch - Full Stainless Steel","public_title":null,"options":["Default Title"],"price":84588,"weight":5035,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"9316800467761"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55005.jpg?v=1525971744"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55005.jpg?v=1525971744","options":["Title"],"content":"\u003cb\u003e40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Rib™\u003c\/b\u003e\u003cbr\u003eANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePower Ratio\u003c\/b\u003e\u003cbr\u003ePower Ratio is the mechanical advantage of the winch and is calculated as follows:\u003cbr\u003e\u003cbr\u003e\u003cu\u003elength of handle x gear ratio\u003c\/u\u003e\u003cbr\u003e        radius of drum\u003cbr\u003e\u003cbr\u003eThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).\u003cbr\u003e\u003cbr\u003eThis means that by applying a load of 10kg, using a 10\" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eAesthetically appealing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA prerequisite for those yachtsman wanting their yacht to look its best\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Stainless Steel - synthetic cap and bases are replaced with stainless steel parts\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eDrum Ø:\u003c\/b\u003e75mm(2-15\/16\")\u003cbr\u003e\u003cb\u003eBase Ø:\u003c\/b\u003e152mm(6\")\u003cbr\u003e\u003cb\u003eHeight:\u003c\/b\u003e174mm(6-7\/8\")\u003cbr\u003e\u003cb\u003eLine Entry:\u003c\/b\u003e71mm(2-13\/16\")\u003cbr\u003e\u003cb\u003eLine Size:\u003c\/b\u003e8-14mm(1\/8 - 11\/16\")\u003cbr\u003e\u003cb\u003eWeight;\u003c\/b\u003e4.9kg(10.8lbs)\u003cbr\u003e\u003cb\u003eGear ratio 1st speed\u003c\/b\u003e1.3 : 1\u003cbr\u003e\u003cb\u003eGear ratio 2nd speed:\u003c\/b\u003e6.0 : 1\u003cbr\u003e\u003cb\u003ePower ratio 1st speed:\u003c\/b\u003e8.9 : 1\u003cbr\u003e\u003cb\u003ePower ratio 2nd speed:\u003c\/b\u003e40.0 : 1\u003cbr\u003e\u003cbr\u003e\u003cb\u003eService Kits\u003c\/b\u003e\u003cbr\u003eRegular maintenance is important for smooth and trouble-free operation of your winches. ANDERSEN Winch Service Kits use authentic factory replacement parts and include all the crucial spare parts necessary to ensure perfect performance from your winch every time. \u003cbr\u003e\u003cbr\u003eIn normal recreational use, we recommend cleaning, greasing and inspection of all moving parts every 2 years for extending winch life. Under extensive use, such as racing, charter or blue water sailing, we recommend more regular maintenance procedures; at least once every year. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN 40 ST FS 2-SPEED WINCH FULL STAINLESS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA2040010000\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800467761"}
ANDERSEN 40 ST FS - 2-Speed Self-Tailing Maunal Winch - Full Stainless Steel - Lightship Marine Outfitters

ANDERSEN 40 ST FS - 2-Speed Self-Tailing Maunal Winch - Full Stainless Steel

$845.88

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelPower Rib™ANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing t...


More Info
{"id":583788003361,"title":"ANDERSEN 46 ST FS 2-Speed Self-Tailing Winch - Full Stainless Steel","handle":"andersen-46-st-fs-2-speed-self-tailing-winch-full-stainless-steel","description":"\u003cp\u003e\u003cstrong\u003e40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.\u003c\/p\u003e\u003cp\u003eFrom top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper \u0026amp; lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”\u003c\/p\u003e\u003cp\u003eAs with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. \u003c\/p\u003e\u003cp\u003eDrive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. \u003c\/p\u003e\u003cp\u003eThe upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower Rib™\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower Ratio\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePower Ratio is the mechanical advantage of the winch and is calculated as follows:\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003elength of handle x gear ratio\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e        radius of drum\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThis means that by applying a load of 10kg, using a 10\" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. \u003c\/p\u003e\u003cp\u003eStainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. \u003c\/p\u003e\u003cp\u003eThe self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. \u003c\/p\u003e\u003cp\u003eAndersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. \u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrum Ø:\u003c\/strong\u003e75mm(3-1\/2\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBase Ø:\u003c\/strong\u003e152mm(7-1\/16\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e174mm(8-1\/4\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLine Entry:\u003c\/strong\u003e71mm(3-9\/16\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLine Size:\u003c\/strong\u003e8-14mm(1\/8 - 11\/16\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeight;\u003c\/strong\u003e4.9kg(17.2lbs)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGear ratio 1st speed\u003c\/strong\u003e2.8 : 1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGear ratio 2nd speed:\u003c\/strong\u003e8.4 : 1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower ratio 1st speed:\u003c\/strong\u003e15.7 : 1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower ratio 2nd speed:\u003c\/strong\u003e47.1 : 1\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN 46 ST FS 2-SPEED WINCH FULL STAINLESS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA2046010000\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800467778","published_at":"2018-07-30T15:51:57-04:00","created_at":"2018-06-25T21:59:35-04:00","vendor":"Andersen","type":"Sailing","tags":["Winches"],"price":119288,"price_min":119288,"price_max":119288,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7418576175137,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55006","requires_shipping":true,"taxable":true,"featured_image":{"id":2288330866721,"product_id":583788003361,"position":1,"created_at":"2018-06-25T21:59:35-04:00","updated_at":"2018-06-25T21:59:35-04:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55006.jpg?v=1529978375","variant_ids":[7418576175137]},"available":true,"name":"ANDERSEN 46 ST FS 2-Speed Self-Tailing Winch - Full Stainless Steel","public_title":null,"options":["Default Title"],"price":119288,"weight":7802,"compare_at_price":null,"inventory_quantity":6,"inventory_management":"shopify","inventory_policy":"deny","barcode":"9316800467778"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55006.jpg?v=1529978375"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55006.jpg?v=1529978375","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003e40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless Steel\u003c\/strong\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.\u003c\/p\u003e\u003cp\u003eFrom top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper \u0026amp; lower trim rings are manufactured in highest quality and beautifully polished grade 316 stainless steel. The dramatic result is a highly reflective winch that becomes a highlight of the boat and a true reflection of your yachting pride. We like to say, “Full Stainless – Beyond Good Looks.”\u003c\/p\u003e\u003cp\u003eAs with all ANDERSEN Winches™, our Full Stainless Self-Tailing winch features the exclusive stainless steel Power Rib™ drum for maximum power and extended line life. This model also uses our exclusive self-tailing device that automatically accommodates a wide range of different line sizes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eMaterials\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAndersen winch drums are produced from grade 316L stainless steel, cold formed in stages during manufacture to further increase strength and hardness as it takes its final form. The resulting construction is lightweight, yet stiff and unyielding. \u003c\/p\u003e\u003cp\u003eDrive shafts are in grade 329 duplex stainless steel. Pawls are cut from a cold pressed profile in grade 316 stainless steel and are virtually unbreakable. \u003c\/p\u003e\u003cp\u003eThe upper center stems are manufactured from aluminum bronze for ultimate durability. The combination of materials and design contribute to a lightweight, rigid final assembly that enhances. the mechanical efficiency of the winch. Andersen winces are of similar weight to winches with aluminum drums, but are far more durable. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower Rib™\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eANDERSEN Winches© feature the Power Rib™. Unlike other winches with abrasive drum surfaces, ANDERSEN winch drums have vertical ribs running up the surface. This combined with the smooth polished stainless steel gives a maximum grip and minimum wear on ropes, reducing the replacements costs of sheets and halyards. What's more, the Power Rib principle simply makes sailing more pleasurable. Fewer turns on the winch make tacking easier. Sheets can be gently eased out without harsh snatching and the risks of overrides and jammed sheets are significantly reduced. The grip provided by the ribs will remain the same year after year, unlike many other winches with an abrasive or sandpaper-like surface. Such surfaces have a tendency to wear down both ropes and themselves.\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower Ratio\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePower Ratio is the mechanical advantage of the winch and is calculated as follows:\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cu\u003elength of handle x gear ratio\u003c\/u\u003e\u003c\/p\u003e\u003cp\u003e        radius of drum\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe pull of the winch is based on the Power Ratio and not just on the physical size of the winch or the diameter of the drum. The Power Ratio is used to determine the load the winch may handle as follows:pull of handle (kg x Power Ratio = pull of winch (kg).\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThis means that by applying a load of 10kg, using a 10\" standard handle, on a Power Ratio 40:1 winch, the winch can pull 400kg, assuming that the winch is 100% efficient. This is not possible in practice as the efficiency is reduced by internal mechanical friction losses.\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eAnderson winch drums incorporate the distinctive Power Rib which ensures a controlled grip on the line at all times, whether trimming or easing. The highly polished stainless steel surface minimizes vertical friction and allows the loaded rope turns to slide easily upward as the drum rotates, without the shuddering and excessive rope wear seen on winches that rely on a rough surface finish for grip. \u003c\/p\u003e\u003cp\u003eStainless steel roller bearings and ball bearings carry the highest drum loads to the center stem of the winch, minimizing efficiency losses due to friction. \u003c\/p\u003e\u003cp\u003eThe self tailing arm can be rotated through 360 degrees for optimum positioning (40ST and larger). Stainless steel self-tailing jaws adjust automatically to suit various rope sizes. \u003c\/p\u003e\u003cp\u003eAndersen winches are designed for simple, straightforward installation and maintenance. Servicing is only required every two years or so, under normal use. \u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDrum Ø:\u003c\/strong\u003e75mm(3-1\/2\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBase Ø:\u003c\/strong\u003e152mm(7-1\/16\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHeight:\u003c\/strong\u003e174mm(8-1\/4\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLine Entry:\u003c\/strong\u003e71mm(3-9\/16\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLine Size:\u003c\/strong\u003e8-14mm(1\/8 - 11\/16\")\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeight;\u003c\/strong\u003e4.9kg(17.2lbs)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGear ratio 1st speed\u003c\/strong\u003e2.8 : 1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eGear ratio 2nd speed:\u003c\/strong\u003e8.4 : 1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower ratio 1st speed:\u003c\/strong\u003e15.7 : 1\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003ePower ratio 2nd speed:\u003c\/strong\u003e47.1 : 1\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp data-empty='\"true\"'\u003e\u003cbr\u003e\u003c\/p\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN 46 ST FS 2-SPEED WINCH FULL STAINLESS\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA2046010000\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800467778"}
ANDERSEN 46 ST FS 2-Speed Self-Tailing Winch - Full Stainless Steel

ANDERSEN 46 ST FS 2-Speed Self-Tailing Winch - Full Stainless Steel

$1,192.88

40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom t...


More Info
{"id":513309802529,"title":"ANDERSEN Large Bailer - Outside Mount","handle":"andersen-large-bailer-outside-mount","description":"\u003cb\u003eLarge Bailer - Outside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 80 x 142mm (3-3\/16 x 5-9\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN LARGE BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554136\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800468065","published_at":"2019-03-22T15:00:43-04:00","created_at":"2018-02-16T13:55:07-05:00","vendor":"Andersen","type":"Sailing","tags":["andersen","Hardware","sailing"],"price":10595,"price_min":10595,"price_max":10595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875801387041,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55011","requires_shipping":true,"taxable":true,"featured_image":{"id":1976535908385,"product_id":513309802529,"position":1,"created_at":"2018-02-16T13:55:07-05:00","updated_at":"2018-05-10T13:02:26-04:00","alt":"ANDERSEN Large Bailer - Outside Mount - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55011.jpg?v=1525971746","variant_ids":[6875801387041]},"available":true,"name":"ANDERSEN Large Bailer - Outside Mount","public_title":null,"options":["Default Title"],"price":10595,"weight":318,"compare_at_price":null,"inventory_quantity":5,"inventory_management":"shopify","inventory_policy":"deny","barcode":"9316800468065"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55011.jpg?v=1525971746"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55011.jpg?v=1525971746","options":["Title"],"content":"\u003cb\u003eLarge Bailer - Outside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 80 x 142mm (3-3\/16 x 5-9\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN LARGE BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554136\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800468065"}
ANDERSEN Large Bailer - Outside Mount - Lightship Marine Outfitters

ANDERSEN Large Bailer - Outside Mount

$105.95

Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective and re...


More Info
{"id":513309769761,"title":"ANDERSEN Super Max Bailer - Inside Mount","handle":"andersen-super-max-bailer-inside-mount","description":"\u003cb\u003eSuper Max Bailer - Inside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 78 x 135mm (3-1\/8 x 5-5\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN SUPER MAX BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554133\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5799999213823","published_at":"2019-06-28T16:59:31-04:00","created_at":"2018-02-16T13:55:05-05:00","vendor":"Andersen","type":"Sailing","tags":["andersen","Hardware","sailing"],"price":13395,"price_min":13395,"price_max":13395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875801354273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55010","requires_shipping":true,"taxable":true,"featured_image":{"id":1976535875617,"product_id":513309769761,"position":1,"created_at":"2018-02-16T13:55:05-05:00","updated_at":"2018-05-10T13:02:27-04:00","alt":"ANDERSEN Super Max Bailer - Inside Mount - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55010.jpg?v=1525971747","variant_ids":[6875801354273]},"available":true,"name":"ANDERSEN Super Max Bailer - Inside Mount","public_title":null,"options":["Default Title"],"price":13395,"weight":386,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5799999213823"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55010.jpg?v=1525971747"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55010.jpg?v=1525971747","options":["Title"],"content":"\u003cb\u003eSuper Max Bailer - Inside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 78 x 135mm (3-1\/8 x 5-5\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN SUPER MAX BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554133\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5799999213823"}
ANDERSEN Super Max Bailer - Inside Mount - Lightship Marine Outfitters

ANDERSEN Super Max Bailer - Inside Mount

$133.95

Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective and ...


More Info
{"id":513309704225,"title":"ANDERSEN Super Medium Bailer - Inside Mount","handle":"andersen-super-medium-bailer-inside-mount","description":"\u003cb\u003eSuper Medium Bailer - Inside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 67 x 135mm (2-11\/16 x 5-5\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN SUPER MEDIUM BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554132\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800468089","published_at":"2018-09-04T08:40:17-04:00","created_at":"2018-02-16T13:55:03-05:00","vendor":"Andersen","type":"Sailing","tags":["andersen","Hardware","sailing"],"price":12595,"price_min":12595,"price_max":12595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875801255969,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55009","requires_shipping":true,"taxable":true,"featured_image":{"id":1976535613473,"product_id":513309704225,"position":1,"created_at":"2018-02-16T13:55:03-05:00","updated_at":"2018-05-10T13:02:29-04:00","alt":"ANDERSEN Super Medium Bailer - Inside Mount - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55009.jpg?v=1525971749","variant_ids":[6875801255969]},"available":true,"name":"ANDERSEN Super Medium Bailer - Inside Mount","public_title":null,"options":["Default Title"],"price":12595,"weight":340,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"9316800468089"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55009.jpg?v=1525971749"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55009.jpg?v=1525971749","options":["Title"],"content":"\u003cb\u003eSuper Medium Bailer - Inside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 67 x 135mm (2-11\/16 x 5-5\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN SUPER MEDIUM BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554132\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800468089"}
ANDERSEN Super Medium Bailer - Inside Mount - Lightship Marine Outfitters

ANDERSEN Super Medium Bailer - Inside Mount

$125.95

Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features: Effective...


More Info
{"id":513309671457,"title":"ANDERSEN Super Mini Bailer - Inside Mount","handle":"andersen-super-mini-bailer-inside-mount","description":"\u003cb\u003eSuper Mini Bailer - Indside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 61 x 106mm (2-7\/16 x 4-3\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003eThe Super Mini Special Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted without spring lever.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN SUPER MINI BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554131\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800468072","published_at":"2019-08-28T14:21:38-04:00","created_at":"2018-02-16T13:55:01-05:00","vendor":"Andersen","type":"Sailing","tags":["andersen","Hardware","sailing"],"price":10595,"price_min":10595,"price_max":10595,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875801223201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW55008","requires_shipping":true,"taxable":true,"featured_image":{"id":1976535580705,"product_id":513309671457,"position":1,"created_at":"2018-02-16T13:55:02-05:00","updated_at":"2018-05-10T13:02:29-04:00","alt":"ANDERSEN Super Mini Bailer - Inside Mount - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55008.jpg?v=1525971749","variant_ids":[6875801223201]},"available":true,"name":"ANDERSEN Super Mini Bailer - Inside Mount","public_title":null,"options":["Default Title"],"price":10595,"weight":227,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"9316800468072"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55008.jpg?v=1525971749"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW55008.jpg?v=1525971749","options":["Title"],"content":"\u003cb\u003eSuper Mini Bailer - Indside Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFlange Size:\u003c\/b\u003e - 61 x 106mm (2-7\/16 x 4-3\/16\")\u003cbr\u003e\u003cbr\u003eThe ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.\u003cbr\u003e\u003cbr\u003eANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.\u003cbr\u003e\u003cbr\u003eThe Super Mini Special Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted without spring lever.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eEffective and reliable means of automatic bailing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade of stainless steel and guaranteeing years of trouble free servicing\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eANDERSEN SUPER MINI BAILER\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eANDERSEN\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003eRA554131\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e9316800468072"}
ANDERSEN Super Mini Bailer - Inside Mount - Lightship Marine Outfitters

ANDERSEN Super Mini Bailer - Inside Mount

$105.95

Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.The Super Mini Specia...


More Info
{"id":513304657953,"title":"Barton Marine - 165mm (6.5\") Nylon Sliding Cleat Fits 25mm (0.98\") 'T' Track","handle":"barton-marine-165mm-6-5-nylon-sliding-cleat-fits-25mm-0-98-t-track","description":"\u003cb\u003eNylon Sliding Cleats - 165mm (6.5\")\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.\u003cbr\u003eWhen not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.\u003cbr\u003eAlternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.\u003cbr\u003e\u003cbr\u003e25mm (0.98\") cleats have an extruded aluminium base, nylon moulded cleat and screw type lock \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 165MM SLIDING CLEAT FITS 25MM T TRACK\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e51 253\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088512539","published_at":"2019-08-07T13:51:47-04:00","created_at":"2018-02-16T13:51:09-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","Hardware","sailing"],"price":6188,"price_min":6188,"price_max":6188,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875794341921,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46627","requires_shipping":true,"taxable":true,"featured_image":{"id":1976522375201,"product_id":513304657953,"position":1,"created_at":"2018-02-16T13:51:09-05:00","updated_at":"2018-05-10T07:58:40-04:00","alt":"Barton Marine - 165mm (6.5\") Nylon Sliding Cleat Fits 25mm (0.98\") 'T' Track - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46627.jpg?v=1525953520","variant_ids":[6875794341921]},"available":true,"name":"Barton Marine - 165mm (6.5\") Nylon Sliding Cleat Fits 25mm (0.98\") 'T' Track","public_title":null,"options":["Default Title"],"price":6188,"weight":136,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088512539"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46627.jpg?v=1525953520"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46627.jpg?v=1525953520","options":["Title"],"content":"\u003cb\u003eNylon Sliding Cleats - 165mm (6.5\")\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.\u003cbr\u003eWhen not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.\u003cbr\u003eAlternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.\u003cbr\u003e\u003cbr\u003e25mm (0.98\") cleats have an extruded aluminium base, nylon moulded cleat and screw type lock \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 165MM SLIDING CLEAT FITS 25MM T TRACK\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e51 253\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088512539"}
Barton Marine - 165mm (6.5") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track - Lightship Marine Outfitters

Barton Marine - 165mm (6.5") Nylon Sliding Cleat Fits 25mm (0.98") 'T' Track

$61.88

Nylon Sliding Cleats - 165mm (6.5")A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyre...


More Info
{"id":534230302753,"title":"Barton Marine - 175mm (6.89\") Aluminum Sliding Cleat Fits 32mm (1.26\") 'T' Track","handle":"barton-marine-175mm-6-89-aluminum-sliding-cleat-fits-32mm-1-26-t-track","description":"\u003cb\u003eAluminum Sliding Cleats - 175mm (6.89\")\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.\u003cbr\u003eWhen not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.\u003cbr\u003eAlternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.\u003cbr\u003e\u003cbr\u003e32mm (1.26\") cleats have an extruded aluminium base, cast aluminium cleat and plunger type lock. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 175MM SLIDING CLEAT FITS 32MM T TRACK\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e51 322\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088513222","published_at":"2019-06-10T14:14:32-04:00","created_at":"2018-03-20T17:59:16-04:00","vendor":"Barton Marine","type":"Sailing","tags":["Hardware"],"price":11488,"price_min":11488,"price_max":11488,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7009051967521,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46628","requires_shipping":true,"taxable":true,"featured_image":{"id":2046604935201,"product_id":534230302753,"position":1,"created_at":"2018-03-20T17:59:16-04:00","updated_at":"2018-05-10T07:58:42-04:00","alt":"Barton Marine - 175mm (6.89\") Aluminum Sliding Cleat Fits 32mm (1.26\") 'T' Track - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46628.jpg?v=1525953522","variant_ids":[7009051967521]},"available":true,"name":"Barton Marine - 175mm (6.89\") Aluminum Sliding Cleat Fits 32mm (1.26\") 'T' Track","public_title":null,"options":["Default Title"],"price":11488,"weight":363,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088513222"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46628.jpg?v=1525953522"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46628.jpg?v=1525953522","options":["Title"],"content":"\u003cb\u003eAluminum Sliding Cleats - 175mm (6.89\")\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.\u003cbr\u003eWhen not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.\u003cbr\u003eAlternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use - reducing deck clutter and rope snags.\u003cbr\u003e\u003cbr\u003e32mm (1.26\") cleats have an extruded aluminium base, cast aluminium cleat and plunger type lock. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 175MM SLIDING CLEAT FITS 32MM T TRACK\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e51 322\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088513222"}
Barton Marine - 175mm (6.89") Aluminum Sliding Cleat Fits 32mm (1.26") 'T' Track - Lightship Marine Outfitters

Barton Marine - 175mm (6.89") Aluminum Sliding Cleat Fits 32mm (1.26") 'T' Track

$114.88

Aluminum Sliding Cleats - 175mm (6.89")A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable ea...


More Info
{"id":1820995584051,"title":"Barton Marine 12mm High Load Eye","handle":"barton-marine-12mm-high-load-eye","description":"\u003cb\u003eHigh Load Eye - 12mm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 12MM HIGH LOAD EYE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBarton Marine\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e60 451\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088604517\u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 12MM HIGH LOAD EYE","published_at":"2019-04-08T12:14:23-04:00","created_at":"2019-04-08T12:14:24-04:00","vendor":"Barton Marine","type":"Sailing","tags":["Hardware"],"price":2088,"price_min":2088,"price_max":2088,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":17054981521459,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46636","requires_shipping":true,"taxable":true,"featured_image":{"id":5449658761267,"product_id":1820995584051,"position":1,"created_at":"2019-04-08T12:14:24-04:00","updated_at":"2019-04-08T12:14:24-04:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46636.jpg?v=1554740064","variant_ids":[17054981521459]},"available":true,"name":"Barton Marine 12mm High Load Eye","public_title":null,"options":["Default Title"],"price":2088,"weight":45,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088604517"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46636.jpg?v=1554740064"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46636.jpg?v=1554740064","options":["Title"],"content":"\u003cb\u003eHigh Load Eye - 12mm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 12MM HIGH LOAD EYE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBarton Marine\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e60 451\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088604517\u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 12MM HIGH LOAD EYE"}
Barton Marine 12mm High Load Eye

Barton Marine 12mm High Load Eye

$20.88

High Load Eye - 12mmManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. Product : BARTON MARINE 12MM HIGH LOAD EYE Manufacturer : Barton Marine Manuf...


More Info
{"id":513304952865,"title":"Barton Marine 16mm High Load Eye","handle":"barton-marine-16mm-high-load-eye","description":"\u003cb\u003eHigh Load Eye - 16mm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 16MM HIGH LOAD EYE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e60 452\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088604524","published_at":"2019-01-13T23:45:08-05:00","created_at":"2018-02-16T13:51:25-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","Hardware","sailing"],"price":2088,"price_min":2088,"price_max":2088,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875794669601,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46637","requires_shipping":true,"taxable":true,"featured_image":{"id":1976523096097,"product_id":513304952865,"position":1,"created_at":"2018-02-16T13:51:25-05:00","updated_at":"2018-05-10T07:58:44-04:00","alt":"Barton Marine 16mm High Load Eye - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46637.jpg?v=1525953524","variant_ids":[6875794669601]},"available":true,"name":"Barton Marine 16mm High Load Eye","public_title":null,"options":["Default Title"],"price":2088,"weight":91,"compare_at_price":null,"inventory_quantity":1,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088604524"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46637.jpg?v=1525953524"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46637.jpg?v=1525953524","options":["Title"],"content":"\u003cb\u003eHigh Load Eye - 16mm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 16MM HIGH LOAD EYE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e60 452\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088604524"}
Barton Marine 16mm High Load Eye - Lightship Marine Outfitters

Barton Marine 16mm High Load Eye

$20.88

High Load Eye - 16mmManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes. Product : BARTON MARINE 16MM HIGH LOAD EYE Manufacturer : BARTON MARINE Manuf...


More Info
{"id":1600404324403,"title":"Barton Marine Aluminum Winch Handle - 10\"","handle":"barton-marine-aluminum-winch-handle-10","description":"\u003cb\u003eAluminum Winch Handle - 10\"\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAll designed to fit international star sockets and standard deck filler caps.\u003cbr\u003e\u003cbr\u003eLight duty, inexpensive handles w\/easy-grip roller handle and 'Spectro' grey anodised finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImportant note:\u003c\/b\u003e\u003cbr\u003eThese handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs) \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 10\" ALUMINUM WINCH HANDLE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e21 002\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088210022","published_at":"2018-11-23T14:52:10-05:00","created_at":"2018-11-23T14:52:11-05:00","vendor":"Barton Marine","type":"Sailing","tags":["Winches"],"price":6988,"price_min":6988,"price_max":6988,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15561905012787,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46610","requires_shipping":true,"taxable":true,"featured_image":{"id":4570346618931,"product_id":1600404324403,"position":1,"created_at":"2018-11-23T14:52:11-05:00","updated_at":"2018-11-23T14:52:11-05:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46610.jpg?v=1543002731","variant_ids":[15561905012787]},"available":true,"name":"Barton Marine Aluminum Winch Handle - 10\"","public_title":null,"options":["Default Title"],"price":6988,"weight":363,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088210022"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46610.jpg?v=1543002731"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46610.jpg?v=1543002731","options":["Title"],"content":"\u003cb\u003eAluminum Winch Handle - 10\"\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAll designed to fit international star sockets and standard deck filler caps.\u003cbr\u003e\u003cbr\u003eLight duty, inexpensive handles w\/easy-grip roller handle and 'Spectro' grey anodised finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImportant note:\u003c\/b\u003e\u003cbr\u003eThese handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs) \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 10\" ALUMINUM WINCH HANDLE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e21 002\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088210022"}
Barton Marine Aluminum Winch Handle - 10"

Barton Marine Aluminum Winch Handle - 10"

$69.88

Aluminum Winch Handle - 10"All designed to fit international star sockets and standard deck filler caps.Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish.Important note:These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SW...


More Info
{"id":513304100897,"title":"Barton Marine Aluminum Winch Handle - 8\"","handle":"barton-marine-aluminum-winch-handle-8","description":"\u003cb\u003eAluminum Winch Handle - 8\"\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAll designed to fit international star sockets and standard deck filler caps.\u003cbr\u003e\u003cbr\u003eLight duty, inexpensive handles w\/easy-grip roller handle and 'Spectro' grey anodised finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImportant note:\u003c\/b\u003e\u003cbr\u003eThese handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs) \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 8\" ALUMINUM WINCH HANDLE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e21 001\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088210015","published_at":"2018-08-24T20:02:37-04:00","created_at":"2018-02-16T13:50:47-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","sailing","Winches"],"price":4988,"price_min":4988,"price_max":4988,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875793784865,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46608","requires_shipping":true,"taxable":true,"featured_image":{"id":1976521097249,"product_id":513304100897,"position":1,"created_at":"2018-02-16T13:50:47-05:00","updated_at":"2018-05-10T07:58:50-04:00","alt":"Barton Marine Aluminum Winch Handle - 8\" - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46608.jpg?v=1525953530","variant_ids":[6875793784865]},"available":true,"name":"Barton Marine Aluminum Winch Handle - 8\"","public_title":null,"options":["Default Title"],"price":4988,"weight":318,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088210015"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46608.jpg?v=1525953530"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46608.jpg?v=1525953530","options":["Title"],"content":"\u003cb\u003eAluminum Winch Handle - 8\"\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eAll designed to fit international star sockets and standard deck filler caps.\u003cbr\u003e\u003cbr\u003eLight duty, inexpensive handles w\/easy-grip roller handle and 'Spectro' grey anodised finish.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eImportant note:\u003c\/b\u003e\u003cbr\u003eThese handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs) \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 8\" ALUMINUM WINCH HANDLE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e21 001\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088210015"}
Barton Marine Aluminum Winch Handle - 8" - Lightship Marine Outfitters

Barton Marine Aluminum Winch Handle - 8"

$49.88

Aluminum Winch Handle - 8"All designed to fit international star sockets and standard deck filler caps.Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish.Important note:These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL...


More Info
{"id":544156352545,"title":"Barton Marine Cruiser Block - 54mm","handle":"barton-marine-cruiser-block-54mm","description":"\u003cb\u003eCruiser Block - 54mm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis range of high load cruiser blocks are of rugged construction, featuring high grade injection moulded side plates, with all loadcarrying components from 316 grade stainless steel. Side plates are through-bolted and riveted for added strength and security.This good looking and versatile range is designed for use on larger cruising and racing yachts.All are designed for ease of use with our ball bearing mainsheet traveller systems.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLength:142mm (5.60\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:263gr(9.2oz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 54 MM CRUISER BLOCK\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e05 140\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088051403","published_at":"2018-09-28T22:53:47-04:00","created_at":"2018-04-06T15:20:20-04:00","vendor":"Barton Marine","type":"Sailing","tags":["Hardware"],"price":13188,"price_min":13188,"price_max":13188,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":7057259298849,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW59734","requires_shipping":true,"taxable":true,"featured_image":{"id":2080929513505,"product_id":544156352545,"position":1,"created_at":"2018-04-06T15:20:20-04:00","updated_at":"2018-05-10T07:58:56-04:00","alt":"Barton Marine Cruiser Block - 54mm - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59734.jpg?v=1525953536","variant_ids":[7057259298849]},"available":true,"name":"Barton Marine Cruiser Block - 54mm","public_title":null,"options":["Default Title"],"price":13188,"weight":544,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088051403"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59734.jpg?v=1525953536"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59734.jpg?v=1525953536","options":["Title"],"content":"\u003cb\u003eCruiser Block - 54mm\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis range of high load cruiser blocks are of rugged construction, featuring high grade injection moulded side plates, with all loadcarrying components from 316 grade stainless steel. Side plates are through-bolted and riveted for added strength and security.This good looking and versatile range is designed for use on larger cruising and racing yachts.All are designed for ease of use with our ball bearing mainsheet traveller systems.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLength:142mm (5.60\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight:263gr(9.2oz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE 54 MM CRUISER BLOCK\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e05 140\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088051403"}
Barton Marine Cruiser Block - 54mm - Lightship Marine Outfitters

Barton Marine Cruiser Block - 54mm

$131.88

Cruiser Block - 54mmThis range of high load cruiser blocks are of rugged construction, featuring high grade injection moulded side plates, with all loadcarrying components from 316 grade stainless steel. Side plates are through-bolted and riveted for added strength and security.This good looking and versatile range is designed for use on larger ...


More Info
{"id":1625067683891,"title":"Barton Marine Deck Organizer - 5 Sheave","handle":"barton-marine-deck-organizer-5-sheave","description":"\u003cb\u003eDeck Organizer - 5 Sheave\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with Spectro' grey anodized finish.Sheaves are made from moulded Acetal with hollow stainless rivets to allow easy and tidy fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLength: 318mm (12.52\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth: 38mm (1.50\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight: 28mm (1.10\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 465gr (16.4oz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DECK ORGANIZER 5 SHEAVE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e81 685\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088816859","published_at":"2018-12-06T15:31:40-05:00","created_at":"2018-12-06T15:31:41-05:00","vendor":"Barton Marine","type":"Sailing","tags":["Blocks"],"price":12688,"price_min":12688,"price_max":12688,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15852162383923,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW59731","requires_shipping":true,"taxable":true,"featured_image":{"id":4657970217011,"product_id":1625067683891,"position":1,"created_at":"2018-12-06T15:31:41-05:00","updated_at":"2018-12-06T15:31:41-05:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59731.jpg?v=1544128301","variant_ids":[15852162383923]},"available":true,"name":"Barton Marine Deck Organizer - 5 Sheave","public_title":null,"options":["Default Title"],"price":12688,"weight":454,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088816859"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59731.jpg?v=1544128301"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59731.jpg?v=1544128301","options":["Title"],"content":"\u003cb\u003eDeck Organizer - 5 Sheave\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with Spectro' grey anodized finish.Sheaves are made from moulded Acetal with hollow stainless rivets to allow easy and tidy fitting.\u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLength: 318mm (12.52\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWidth: 38mm (1.50\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHeight: 28mm (1.10\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 465gr (16.4oz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DECK ORGANIZER 5 SHEAVE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e81 685\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088816859"}
Barton Marine Deck Organizer - 5 Sheave

Barton Marine Deck Organizer - 5 Sheave

$126.88

Deck Organizer - 5 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with Spectro' grey anodized finish.Sheaves are made from moulded Acetal with hollow stainless rivets to allow easy and tidy fitting.Specifications: Length: 318mm (12.52") Wid...


More Info
{"id":513305673761,"title":"Barton Marine Dinghy Mast Support","handle":"barton-marine-dinghy-mast-support","description":"\u003cb\u003eDinghy Mast Support\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDesigned to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.\u003cbr\u003e\u003cbr\u003eThe yolk features a soft neoprene pad to protect the mast, shrouds and lines. Generous eyelets in the yolk allow for a securing line to be easily attached. A trailer board can be fitted to the cross plate with 2 x 6mm screws (not supplied).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Easy to fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e No fastenings required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Fully and easily adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Increases towing safety\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Prevents damage to mast and deck\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DINGHY MAST SUPPORT\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 300\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423002","published_at":"2019-07-23T13:56:59-04:00","created_at":"2018-02-16T13:52:12-05:00","vendor":"Barton Marine","type":"Sailing","tags":["Accessories","barton-marine","sailing"],"price":11588,"price_min":11588,"price_max":11588,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875795554337,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW50672","requires_shipping":true,"taxable":true,"featured_image":{"id":1976525750305,"product_id":513305673761,"position":1,"created_at":"2018-02-16T13:52:13-05:00","updated_at":"2018-05-10T07:58:58-04:00","alt":"Barton Marine Dinghy Mast Support - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW50672.jpg?v=1525953538","variant_ids":[6875795554337]},"available":true,"name":"Barton Marine Dinghy Mast Support","public_title":null,"options":["Default Title"],"price":11588,"weight":1134,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088423002"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW50672.jpg?v=1525953538"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW50672.jpg?v=1525953538","options":["Title"],"content":"\u003cb\u003eDinghy Mast Support\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eDesigned to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.\u003cbr\u003e\u003cbr\u003eThe yolk features a soft neoprene pad to protect the mast, shrouds and lines. Generous eyelets in the yolk allow for a securing line to be easily attached. A trailer board can be fitted to the cross plate with 2 x 6mm screws (not supplied).\u003cbr\u003e\u003cbr\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e Easy to fit\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e No fastenings required\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Fully and easily adjustable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Increases towing safety\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e Prevents damage to mast and deck\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DINGHY MAST SUPPORT\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 300\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423002"}
Barton Marine Dinghy Mast Support - Lightship Marine Outfitters

Barton Marine Dinghy Mast Support

$115.88

Dinghy Mast SupportDesigned to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.The yolk features a soft neoprene pad to protect the mast, shrouds and...


More Info
{"id":517084086305,"title":"Barton Marine DO 550 Double Rope Clutch","handle":"barton-marine-do-550-double-rope-clutch","description":"\u003cb\u003eDouble Rope Clutch \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMax Rope Diameter:\u003c\/b\u003eUp 12mm(0.47\")\u003cbr\u003e\u003cb\u003eFastening:\u003c\/b\u003e6mm x 4 (0.24\" x 4)\u003cbr\u003e\u003cb\u003eSWL:\u003c\/b\u003e550kg (1,212.54lbs)\u003cbr\u003e\u003cbr\u003eThe Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.\u003cbr\u003e\u003cbr\u003eThe true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.\u003cbr\u003e\u003cbr\u003eA unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).\u003cbr\u003e\u003cbr\u003eThe clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.\u003cbr\u003e\u003cbr\u003eThe D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DO 550 DOUBLE CLUTCH\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e81 501\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088815012","published_at":"2018-10-18T14:55:32-04:00","created_at":"2018-02-22T13:56:38-05:00","vendor":"Barton Marine","type":"Sailing","tags":["Accessories","barton-marine","sailing"],"price":19588,"price_min":19588,"price_max":19588,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6891376082977,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46644","requires_shipping":true,"taxable":true,"featured_image":{"id":1987420586017,"product_id":517084086305,"position":1,"created_at":"2018-02-22T13:56:39-05:00","updated_at":"2018-05-10T07:59:00-04:00","alt":"Barton Marine DO 550 Double Rope Clutch - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46644.jpg?v=1525953540","variant_ids":[6891376082977]},"available":true,"name":"Barton Marine DO 550 Double Rope Clutch","public_title":null,"options":["Default Title"],"price":19588,"weight":590,"compare_at_price":null,"inventory_quantity":4,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088815012"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46644.jpg?v=1525953540"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46644.jpg?v=1525953540","options":["Title"],"content":"\u003cb\u003eDouble Rope Clutch \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMax Rope Diameter:\u003c\/b\u003eUp 12mm(0.47\")\u003cbr\u003e\u003cb\u003eFastening:\u003c\/b\u003e6mm x 4 (0.24\" x 4)\u003cbr\u003e\u003cb\u003eSWL:\u003c\/b\u003e550kg (1,212.54lbs)\u003cbr\u003e\u003cbr\u003eThe Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.\u003cbr\u003e\u003cbr\u003eThe true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.\u003cbr\u003e\u003cbr\u003eA unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).\u003cbr\u003e\u003cbr\u003eThe clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.\u003cbr\u003e\u003cbr\u003eThe D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DO 550 DOUBLE CLUTCH\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e81 501\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088815012"}
Barton Marine DO 550 Double Rope Clutch - Lightship Marine Outfitters

Barton Marine DO 550 Double Rope Clutch

$195.88

Double Rope Clutch Max Rope Diameter:Up 12mm(0.47")Fastening:6mm x 4 (0.24" x 4)SWL:550kg (1,212.54lbs)The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resist...


More Info
{"id":1625067225139,"title":"Barton Marine DO 550 Triple Rope Clutch","handle":"barton-marine-do-550-triple-rope-clutch","description":"\u003cb\u003eTriple Rope Clutch \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMax Rope Diameter:\u003c\/b\u003eUp 12mm(0.47\")\u003cbr\u003e\u003cb\u003eFastening:\u003c\/b\u003e6mm x 6 (0.24\" x 6)\u003cbr\u003e\u003cb\u003eSWL:\u003c\/b\u003e550kg (1,212.54lbs)\u003cbr\u003e\u003cbr\u003eThe Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.\u003cbr\u003e\u003cbr\u003eThe true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.\u003cbr\u003e\u003cbr\u003eA unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).\u003cbr\u003e\u003cbr\u003eThe clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.\u003cbr\u003e\u003cbr\u003eThe D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DO 550 TRIPLE CLUTCH\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e81 502\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088815029","published_at":"2018-12-06T15:31:14-05:00","created_at":"2018-12-06T15:31:15-05:00","vendor":"Barton Marine","type":"Sailing","tags":["Hardware"],"price":28988,"price_min":28988,"price_max":28988,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":15852161728563,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46645","requires_shipping":true,"taxable":true,"featured_image":{"id":4657968611379,"product_id":1625067225139,"position":1,"created_at":"2018-12-06T15:31:15-05:00","updated_at":"2018-12-06T15:31:15-05:00","alt":null,"width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46645.jpg?v=1544128275","variant_ids":[15852161728563]},"available":true,"name":"Barton Marine DO 550 Triple Rope Clutch","public_title":null,"options":["Default Title"],"price":28988,"weight":816,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088815029"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46645.jpg?v=1544128275"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46645.jpg?v=1544128275","options":["Title"],"content":"\u003cb\u003eTriple Rope Clutch \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMax Rope Diameter:\u003c\/b\u003eUp 12mm(0.47\")\u003cbr\u003e\u003cb\u003eFastening:\u003c\/b\u003e6mm x 6 (0.24\" x 6)\u003cbr\u003e\u003cb\u003eSWL:\u003c\/b\u003e550kg (1,212.54lbs)\u003cbr\u003e\u003cbr\u003eThe Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.\u003cbr\u003e\u003cbr\u003eThe true clutch mechanism allows line to be adjusted through the unit in the closed, locked position with minimal slippage. Released under load is positive and requires little effort. The mechanism's opening and closing action is precise and easy to operate, even with cold wet hands. A positive handle lock in the closed position is also featured.\u003cbr\u003e\u003cbr\u003eA unique feature of this design is the removable insert on the top face of the handle. Pop this out and you can easily replace with printed coloured inserts to denote at a glance the function of the unit (i.e main, genoa, spinnaker etc).\u003cbr\u003e\u003cbr\u003eThe clutch's cam and base, manufactured from high grade extruded aluminium, features a specially tempered tooth design which allows for maximum grip with minimal slippage, whilst being kind to your lines. Stainless steel rope fairleads are fitted to both line entry and exit points, this feature prevents wear to both clutch and lines.\u003cbr\u003e\u003cbr\u003eThe D0550 clutch features the advantage of a bolt together construction which allows for ease of servicing and replacement of parts. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DO 550 TRIPLE CLUTCH\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e81 502\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088815029"}
Barton Marine DO 550 Triple Rope Clutch

Barton Marine DO 550 Triple Rope Clutch

$289.88

Triple Rope Clutch Max Rope Diameter:Up 12mm(0.47")Fastening:6mm x 6 (0.24" x 6)SWL:550kg (1,212.54lbs)The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resist...


More Info
{"id":513329659937,"title":"Barton Marine Drain Plug - 15mm (.60\") Bore - White","handle":"barton-marine-drain-plug-15mm-60-bore-white","description":"\u003cstrong\u003eDrain Bung - 15mm(.60\") Bore - White\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type drain bung only is still among the best available.\u003cbr\u003eSupplied with rubber ‘O’ ring for a watertight seal. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DRAIN PLUG WHITE 15MM (19\/32') BORE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 359\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423590","published_at":"2018-09-28T22:47:19-04:00","created_at":"2018-02-16T14:05:59-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","Hardware","sailing"],"price":388,"price_min":388,"price_max":388,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875830091809,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW66520","requires_shipping":true,"taxable":true,"featured_image":{"id":1976565235745,"product_id":513329659937,"position":1,"created_at":"2018-02-16T14:05:59-05:00","updated_at":"2018-05-10T07:59:03-04:00","alt":"Barton Marine Drain Plug - 15mm (.60\") Bore - White - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66520.jpg?v=1525953543","variant_ids":[6875830091809]},"available":true,"name":"Barton Marine Drain Plug - 15mm (.60\") Bore - White","public_title":null,"options":["Default Title"],"price":388,"weight":91,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088423590"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66520.jpg?v=1525953543"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66520.jpg?v=1525953543","options":["Title"],"content":"\u003cstrong\u003eDrain Bung - 15mm(.60\") Bore - White\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type drain bung only is still among the best available.\u003cbr\u003eSupplied with rubber ‘O’ ring for a watertight seal. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DRAIN PLUG WHITE 15MM (19\/32') BORE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 359\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423590"}
Barton Marine Drain Plug - 15mm (.60") Bore - White - Lightship Marine Outfitters

Barton Marine Drain Plug - 15mm (.60") Bore - White

$3.88

Drain Bung - 15mm(.60") Bore - WhiteThis screw-type drain bung only is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal. Product : BARTON MARINE DRAIN PLUG WHITE 15MM (19/32') BORE Manufacturer : BARTON MARINE Manufacturer Part No : 42 359 UPC : 5035088423590


More Info
{"id":513326120993,"title":"Barton Marine Drain Plug - 15mm (19-32\") Bore - Black","handle":"barton-marine-drain-plug-15mm-19-32-bore-black","description":"\u003cb\u003eDrain Bung - 15mm (19\/32')Bore - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type black drain bung is still among the best available.\u003cbr\u003eSupplied with rubber O' ring for a watertight seal. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLength: 15mm (19\/32\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eweight: 7gm(.23oz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE PLUG BLACK 15MM (19\/32\") BORE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 357\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423576","published_at":"2019-06-12T17:42:28-04:00","created_at":"2018-02-16T14:03:51-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","Hardware","sailing"],"price":488,"price_min":488,"price_max":488,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875822981153,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW59725","requires_shipping":true,"taxable":true,"featured_image":{"id":1976561074209,"product_id":513326120993,"position":1,"created_at":"2018-02-16T14:03:51-05:00","updated_at":"2018-05-10T07:59:05-04:00","alt":"Barton Marine Drain Plug - 15mm (19-32\") Bore - Black - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59725.jpg?v=1525953545","variant_ids":[6875822981153]},"available":true,"name":"Barton Marine Drain Plug - 15mm (19-32\") Bore - Black","public_title":null,"options":["Default Title"],"price":488,"weight":45,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088423576"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59725.jpg?v=1525953545"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW59725.jpg?v=1525953545","options":["Title"],"content":"\u003cb\u003eDrain Bung - 15mm (19\/32')Bore - Black\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type black drain bung is still among the best available.\u003cbr\u003eSupplied with rubber O' ring for a watertight seal. \u003cbr\u003e\u003cbr\u003e\u003cb\u003eSpecifications:\u003c\/b\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eLength: 15mm (19\/32\")\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eweight: 7gm(.23oz)\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE PLUG BLACK 15MM (19\/32\") BORE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 357\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423576"}
Barton Marine Drain Plug - 15mm (19-32") Bore - Black - Lightship Marine Outfitters

Barton Marine Drain Plug - 15mm (19-32") Bore - Black

$4.88

Drain Bung - 15mm (19/32')Bore - BlackThis screw-type black drain bung is still among the best available.Supplied with rubber O' ring for a watertight seal. Specifications: Length: 15mm (19/32") weight: 7gm(.23oz) Product : BARTON MARINE PLUG BLACK 15MM (19/32") BORE Manufacturer : BARTON MARINE Manufacturer Part No : 42 357 UPC : 50350884...


More Info
{"id":513329528865,"title":"Barton Marine Drain Plug and Socket - 15mm (.60\") Bore - Black","handle":"barton-marine-drain-plug-and-socket-15mm-60-bore-black","description":"\u003cstrong\u003eDrain Bung \u0026amp; Socket - 15mm(.60\") Bore - Black\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type drain bung and socket is still among the best available.\u003cbr\u003eSupplied with rubber ‘O’ ring for a watertight seal. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE PLUG AND SOCKET BLACK 15MM (19\/32') BORE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 356\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423569","published_at":"2019-08-29T14:20:16-04:00","created_at":"2018-02-16T14:05:56-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","Hardware","sailing"],"price":488,"price_min":488,"price_max":488,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875829960737,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW66518","requires_shipping":true,"taxable":true,"featured_image":{"id":1976565104673,"product_id":513329528865,"position":1,"created_at":"2018-02-16T14:05:56-05:00","updated_at":"2018-05-10T07:59:07-04:00","alt":"Barton Marine Drain Plug and Socket - 15mm (.60\") Bore - Black - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66518.jpg?v=1525953547","variant_ids":[6875829960737]},"available":true,"name":"Barton Marine Drain Plug and Socket - 15mm (.60\") Bore - Black","public_title":null,"options":["Default Title"],"price":488,"weight":91,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088423569"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66518.jpg?v=1525953547"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66518.jpg?v=1525953547","options":["Title"],"content":"\u003cstrong\u003eDrain Bung \u0026amp; Socket - 15mm(.60\") Bore - Black\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type drain bung and socket is still among the best available.\u003cbr\u003eSupplied with rubber ‘O’ ring for a watertight seal. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE PLUG AND SOCKET BLACK 15MM (19\/32') BORE\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 356\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423569"}
Barton Marine Drain Plug and Socket - 15mm (.60") Bore - Black - Lightship Marine Outfitters

Barton Marine Drain Plug and Socket - 15mm (.60") Bore - Black

$4.88

Drain Bung & Socket - 15mm(.60") Bore - BlackThis screw-type drain bung and socket is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal. Product : BARTON MARINE PLUG AND SOCKET BLACK 15MM (19/32') BORE Manufacturer : BARTON MARINE Manufacturer Part No : 42 356 UPC : 5035088423569


More Info
{"id":513329594401,"title":"Barton Marine Drain Plug and Socket - 15mm (.60\") Bore - White","handle":"barton-marine-drain-plug-and-socket-15mm-60-bore-white","description":"\u003cstrong\u003eDrain Bung \u0026amp; Socket - 15mm(.60\") Bore - White\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type drain bung and socket is still among the best available.\u003cbr\u003eSupplied with rubber ‘O’ ring for a watertight seal. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DRAIN PLUG AND SOCKET WHITE 15MM (19\/32\")\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 358\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423583","published_at":"2019-07-23T13:57:02-04:00","created_at":"2018-02-16T14:05:58-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","Hardware","sailing"],"price":488,"price_min":488,"price_max":488,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875830026273,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW66519","requires_shipping":true,"taxable":true,"featured_image":{"id":1976565170209,"product_id":513329594401,"position":1,"created_at":"2018-02-16T14:05:58-05:00","updated_at":"2018-05-10T07:59:09-04:00","alt":"Barton Marine Drain Plug and Socket - 15mm (.60\") Bore - White - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66519.jpg?v=1525953549","variant_ids":[6875830026273]},"available":true,"name":"Barton Marine Drain Plug and Socket - 15mm (.60\") Bore - White","public_title":null,"options":["Default Title"],"price":488,"weight":91,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088423583"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66519.jpg?v=1525953549"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66519.jpg?v=1525953549","options":["Title"],"content":"\u003cstrong\u003eDrain Bung \u0026amp; Socket - 15mm(.60\") Bore - White\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThis screw-type drain bung and socket is still among the best available.\u003cbr\u003eSupplied with rubber ‘O’ ring for a watertight seal. \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE DRAIN PLUG AND SOCKET WHITE 15MM (19\/32\")\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e42 358\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088423583"}
Barton Marine Drain Plug and Socket - 15mm (.60") Bore - White - Lightship Marine Outfitters

Barton Marine Drain Plug and Socket - 15mm (.60") Bore - White

$4.88

Drain Bung & Socket - 15mm(.60") Bore - WhiteThis screw-type drain bung and socket is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal. Product : BARTON MARINE DRAIN PLUG AND SOCKET WHITE 15MM (19/32") Manufacturer : BARTON MARINE Manufacturer Part No : 42 358 UPC : 5035088423583


More Info
{"id":513304395809,"title":"Barton Marine Extra Large Wincher (Pair)","handle":"barton-marine-extra-large-wincher-pair","description":"\u003cb\u003eThe Barton 'Wincher'\u003c\/b\u003e\u003cbr\u003e(Pair)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMax Drum Ø\u003c\/b\u003e 90-100mm (3.54\"-3.94\")\u003cbr\u003e\u003cb\u003eMax Rope Ø\u003c\/b\u003e 12-16mm (0.47\"-0.63\")\u003cbr\u003e\u003cb\u003eWeight\u003c\/b\u003e 387g (13.65oz)\u003cbr\u003e\u003cbr\u003eA specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.\u003cbr\u003e\u003cbr\u003eThis simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.\u003cbr\u003e\u003cbr\u003eCleating is achieved by locking the sheet into the Wincher's ribbed central groove.\u003cbr\u003e\u003cbr\u003eBarton 'Winchers' are easy to fit and available in four sizes to suit a wide range of popular winches.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE EXTRA LARGE WINCHER PAIR\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e21 644\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e545780000005","published_at":"2018-08-24T20:02:17-04:00","created_at":"2018-02-16T13:50:58-05:00","vendor":"Barton Marine","type":"Sailing","tags":["barton-marine","sailing","Winches"],"price":8088,"price_min":8088,"price_max":8088,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875794079777,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW46617","requires_shipping":true,"taxable":true,"featured_image":{"id":1976521785377,"product_id":513304395809,"position":1,"created_at":"2018-02-16T13:50:58-05:00","updated_at":"2018-05-10T07:59:11-04:00","alt":"Barton Marine Extra Large Wincher (Pair) - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46617.jpg?v=1525953551","variant_ids":[6875794079777]},"available":true,"name":"Barton Marine Extra Large Wincher (Pair)","public_title":null,"options":["Default Title"],"price":8088,"weight":408,"compare_at_price":null,"inventory_quantity":2,"inventory_management":"shopify","inventory_policy":"deny","barcode":"545780000005"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46617.jpg?v=1525953551"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW46617.jpg?v=1525953551","options":["Title"],"content":"\u003cb\u003eThe Barton 'Wincher'\u003c\/b\u003e\u003cbr\u003e(Pair)\u003cbr\u003e\u003cbr\u003e\u003cb\u003eMax Drum Ø\u003c\/b\u003e 90-100mm (3.54\"-3.94\")\u003cbr\u003e\u003cb\u003eMax Rope Ø\u003c\/b\u003e 12-16mm (0.47\"-0.63\")\u003cbr\u003e\u003cb\u003eWeight\u003c\/b\u003e 387g (13.65oz)\u003cbr\u003e\u003cbr\u003eA specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.\u003cbr\u003e\u003cbr\u003eThis simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.\u003cbr\u003e\u003cbr\u003eCleating is achieved by locking the sheet into the Wincher's ribbed central groove.\u003cbr\u003e\u003cbr\u003eBarton 'Winchers' are easy to fit and available in four sizes to suit a wide range of popular winches.\u003cbr\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE EXTRA LARGE WINCHER PAIR\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e21 644\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e545780000005"}
Barton Marine Extra Large Wincher (Pair) - Lightship Marine Outfitters

Barton Marine Extra Large Wincher (Pair)

$80.88

The Barton 'Wincher'(Pair)Max Drum Ø 90-100mm (3.54"-3.94")Max Rope Ø 12-16mm (0.47"-0.63")Weight 387g (13.65oz)A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.This simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then b...


More Info
{"id":513329463329,"title":"Barton Marine Flexible Tiller Joint","handle":"barton-marine-flexible-tiller-joint","description":"\u003cp\u003e\u003cstrong\u003eFlexible Tiller Joint\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eManufactured from high tech polymers that withstands countless flexing. This joint can be easily removed from the tiller assembly by popping off the snap on cover cap.\u003c\/p\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE LIGHT FLEXIBLE TILLER JOINT LENGTH 58MM\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e43 601\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088436019","published_at":"2018-09-28T22:47:20-04:00","created_at":"2018-02-16T14:05:54-05:00","vendor":"Barton Marine","type":"Sailing","tags":["Accessories","barton-marine","sailing"],"price":1188,"price_min":1188,"price_max":1188,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":6875829895201,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"CW66517","requires_shipping":true,"taxable":true,"featured_image":{"id":1976565039137,"product_id":513329463329,"position":1,"created_at":"2018-02-16T14:05:54-05:00","updated_at":"2018-05-10T07:59:13-04:00","alt":"Barton Marine Flexible Tiller Joint - Lightship Marine Outfitters","width":1000,"height":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66517.jpg?v=1525953553","variant_ids":[6875829895201]},"available":true,"name":"Barton Marine Flexible Tiller Joint","public_title":null,"options":["Default Title"],"price":1188,"weight":45,"compare_at_price":null,"inventory_quantity":3,"inventory_management":"shopify","inventory_policy":"deny","barcode":"5035088436019"}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66517.jpg?v=1525953553"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1656\/9469\/products\/CW66517.jpg?v=1525953553","options":["Title"],"content":"\u003cp\u003e\u003cstrong\u003eFlexible Tiller Joint\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eManufactured from high tech polymers that withstands countless flexing. This joint can be easily removed from the tiller assembly by popping off the snap on cover cap.\u003c\/p\u003e \u003cbr\u003e \u003cb\u003eProduct : \u003c\/b\u003eBARTON MARINE LIGHT FLEXIBLE TILLER JOINT LENGTH 58MM\u003cbr\u003e \u003cb\u003eManufacturer : \u003c\/b\u003eBARTON MARINE\u003cbr\u003e \u003cb\u003eManufacturer Part No : \u003c\/b\u003e43 601\u003cbr\u003e \u003cb\u003eUPC : \u003c\/b\u003e5035088436019"}
Barton Marine Flexible Tiller Joint - Lightship Marine Outfitters

Barton Marine Flexible Tiller Joint

$11.88

Flexible Tiller JointManufactured from high tech polymers that withstands countless flexing. This joint can be easily removed from the tiller assembly by popping off the snap on cover cap. Product : BARTON MARINE LIGHT FLEXIBLE TILLER JOINT LENGTH 58MM Manufacturer : BARTON MARINE Manufacturer Part No : 43 601 UPC : 5035088436019


More Info